BRDYV - TRICHLOROFLUOROMETHANE, 48541
- MSDS: BRDYV
- Manufacturer: SUPELCO INC
- Product Name: TRICHLOROFLUOROMETHANE, 48541
- National Stock Number: 6810-00N038387
Product Identification
Product ID:TRICHLOROFLUOROMETHANE, 48541
MSDS Date:04/06/1990
FSC:6810
NIIN:00N038387
MSDS Number: BRDYV
Responsible Party
BELLEFONTE, PA 16823-0048
US
Emergency Phone: 814-359-3441
Info Phone: 814-359-3441
Cage: 54968
Contractor
Telephone: 314-771-5765/414-273-3850X5996
Cage: 54968
Ingredients
METHANE, TRICHLOROFLUORO-; (TRICHLOROFLUOROMETHANE) (SARA
CAS: 75-69-4
RTECS: PB6125000
Fraction By Weight: 100%
OSHA PEL 1000 PPM
ACGIH TLV: C, 1000 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CHLOROFLUOROCARBON MATERIALS HAVE
PRODUCED SENSITIZATION OF MYOCARDIUM TO EPINEPHRINE IN LAB ANIMALS
AND COULD HAVE A SIMILAR EFFECT IN HUMANS. ADRENOMIMETICS (E.G.,
EPINEPHRINE) MAY BE CONTRAINDICATE D EXCEPT FOR LIFE-SUSTAINING
USES IN HUMANS ACUTELY OR CHRONICALLY EXPOSED TO (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:CHLOROFLUOROCARBONS . VAPOR IS
NARCOTIC IN HIGH CONCENTRATIONS. LIVER DAMAGE, KIDNEY DAMAGE.
CONTACT WITH LIQUID MAY CAUSE FROSTBITE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SKIN:FLUSH
WITH LARGE VOLUMES OF WATER. INHAL:IMMEDIATELY MOVE TO FRESH AIR.
GIVE OXYGEN IF BREATHING IS LABORED. CONTACT A PHYSICIAN.
INGEST:NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.
NEVER TRY TO MAKE AN UNCONSCIOUS PERSON VOMIT.
Fire Fighting
Extinguishing Media:THIS MATERIAL IS NOT FLAMMABLE. DETERMINED BY
SUPPORTING FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED PRESSURE DEMAND SCBA
AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:THERMAL DECOMPOSITION PRODUCTS MAY
INCLUDE CHLORIDES, FLUORIDES AND PHOSGENE .HCL & HF ARE FORMED
WHEN MATERIAL IS HEATED TO DECOMPOSITION.
Accidental Release
Spill Release Procedures:TAKE UP WITH ABSORBENT MATERIAL. VENTILATE
AREA.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:REFRIGERATE IN SEALED CONTAINER.
Other Precautions:NO SMOKING IN AREA OF USE. DO NOT USE IN GENERAL
VICINITY OF ARC WELDING, OPEN FLAMES OR HOT SURFACES. HEAT AND/OR
UV RADIATION MAY CAUSE FORMATION OF CHLORIDES, FLUORIDES AND/OR
PHOSGENE .
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:USE ONLY IN WELL VENTILATED AREAS.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:73.4F,23C
Vapor Density:>1
Appearance and Odor:CLEAR COLORLESS LIQUID.
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
ALKALI METALS
Hazardous Decomposition Products:CHLORIDES, FLUORIDES AND PHOSGENE .
HCL, HF.
Disposal
Waste Disposal Methods:COMPLY WITH ALL APPLICABLE LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.